Protect and Shine Your Pool
Bayrol Protect & Shine
Use Protect & Shine to give your pool a sparkling final touch. Thanks to its unique formula, the pool water becomes visibly brighter and crystal clear and cleaning the waterline becomes much easier.
Protect…
Protect & Shine has a ‘non-stick’ effect that prevents dirt and grease from creams, lotions and cosmetics from depositing on the waterline and the skimmers making cleaning much less of a chore.
…and Shine!
Protect & Shine is a ready-to-use liquid with a unique formula that makes the water crystal clear. The exclusive composition of Protect & Shine provides a very effective clarification of the water. The effect is quickly visible: the water really sparkles.
Protect & Shine is compatible with all filter types (cartridge, sand, glass) and all disinfection methods (chlorine, bromine, active oxygen). In addition, Protect & Shine is economical to use, the 2L canister lasts for a whole season.
Why use Protect & Shine?
Protect & Shine should be used to slow down the fouling of the waterline and skimmers and make the water crystal clear and sparkling. Ideal for often dirty water lines and for pool owners who do not like to clean their water line regularly.
How often should I use Protect & Shine?
40 ml per 10 m³ every 7 days directly in the basin, without diluting it, filtration in operation and near the discharge nozzles.
Why are there black/brown/yellow marks on the water line?
Many oily impurities (especially from creams, sun oils, make-up,..), being immiscible with water, are deposited on the air-water separation line. In addition, since the water evaporates at the surface, limescale deposits also form easily on this water line.
How do you remove black/brown impurities on the water line?
Waterline cleaners remove impurities accumulated on this air-water separation line. Alkaline water line cleaners (Bordnet) mainly clean grease deposits, while acids (Decalcit Super) are to be favoured to remove limescale deposits.
How do you remove stubborn limescale or metallic deposits?
Decalcit Super removes the most stubborn stains (limestone, metals). Lower the water level below the stains and clean them with a solution of Decalcit Super. Use Calcinex to prevent scale formation on pool walls and slatted covers and ensure that pool water balance is correctly maintained.
Dosing/instructions for use
• Shake canister before use.
• Pour the product undiluted into the pool while the circulation pump is running in front of the inlet nozzles.
• Allow the circulation pump to run for at least 12 hours after addition. The product may foam during use.
• Dosage: 40 ml per 10 m3 every 7 days.